X221D & X221D-AI TECHNICAL REFERENCE MANUAL
VERSION: 0.3
Page 11 of 40
cat
/sys/devices/generic_pwm_tachometer/hwmon/hwmon1/rpm
4.3
Manufacturing options
4.3.1
Enclosure
Auvidea can provide custom enclosures for its carrier boards. These enclosures provide a passively
cooled solution. This solution is designed for the AGX models. With a max power draw of 35W
(normal mode) the enclosure temperature reaches 55C° while in 24°C room temperature which is a
safe temperature for Human contact.
The MaxN mode (up to 90W) is not recommended as the enclosure temperature increases above
acceptable levels for direct human contact.
It is also possible to apply your branding on the front and back Plate of the Enclosure. Auvidea has
inhouse capabilities of laser and milling engraving.
4.3.2
Branding and QR codes
Besides the branding options for the enclosure, it is also possible to customize the label field on the
carrier board.
Auvidea uses the label field to engrave a small QR code and serial number to track production
processes.
It is possible to add your custom engravings like logos, text or QR codes to this field.
4.3.3
Custom configurations
The standard carrier board configuration is designed to suit most use cases.
Pleas see the Pinout description for customization examples like voltage configurations (3.3V or
1.8V).
We take pride in tailoring our products to your special need and are capable to adjust it in small
production series. Please contact Auvidea with your special requests to work out a solution.
Image
Note
In the left image the label field is
highlighted.
