Auvidea JNX30D, Техническое справочное руководство

Страница: 12 / 28

JNX30D TECHNICAL REFERENCE MANUAL
VERSION: 1.4 Page 12 of 28 FEB 2022
5.6 J9 - HDMI
Standard pinout
CEC is not supported (pin 13 of HDMI connector)
Power pin 18 is current limited by PTC fuse (5V 50mA)
5.7 J10 - CSI-2 AB
22 pin 0.5mm pitch FPC connector
Pin Description Socket pin Note
1 3.3V Power: connected with bead to 3.3V
(5V optional if bead is moved)
2 CAM-I2C_SDA 215
3 CAM-I2C_SCL 213
4 GND
5 CAM1-MCLK IN: Input - connect to 1.8V or 3.3V output of the camera to
drive the CAM LED.
1: enable CAM LED
0: disable CAM LED
6 CAM1_PWDN 206 OUT: Output (open drain with 2.2k pullup to 3.3V) - connect
to power enable of camera. The control signal is connected
via level shifting inverter to pin 152 of the compute module.
7 GND
8 CSI_B_D1_P 17
9 CSI_B_D1_N 15
10 GND
11 CSI_B_D0_P 5
12 CSI_B_D0_N 3
13 GND
14 CSI_A_CLK_P 12
15 CSI_A_CLK_N 10
16 GND
17 CSI_A_D1_P 18
18 CSI_A_D1_N 16
19 GND
20 CSI_A_D0_P 6
21 CSI_A_D0_N 4
22 GND
See further details in the J5 description.
5.8 J11 - USB 3.0 – 3.1
USB 3.0 Type A standard pinout
In Rev 1: power control is always on (5V 1A)
In Rev 2 and up: Controllable with GPIO pin 126 power on[0]/off[1] (default on[0]) (5V 1A)