Installation: Mechanical
Installation Handbook, AutroSense Nano 116-P-ASENSENANO/DGB, 2010-08-09, Autronica Fire and Security AS
Page 8
4. Installation: Mechanical
Fixing Holes (3 x M5 x 13 slots)
Refer
to
printable
drilling
template
on
next
page
for
accurate
positioning
NB: Ensure the detector is fixed to a flat surface –
otherwise the enclosure will twist.
Cable Entries
2x 20mm Conduit Holes, e.g for
20mm packing glands.
Drilling guides are provided for
drilling two additional 2x 20mm holes
in the top and 1x 20mm hole in the
bottom if needed.
Pipe Entries
¾”
ABS Pipe.
Use a 3/3
”
male to 25mm female
adaptor (AirSense part no.
116-5861-
018.9032
) if 25mm pipe is used.
NB: Do not glue pipes into detector to facilitate
future removal.
