Autowel DRAGON-350A, Руководство пользователя

Страница: 9 / 24

4- 2. Function and explanation
4- 2. Function and explanation 4- 2. Function and explanation
4- 2. Function and explanation
1) POWER switch : power on/ off of welder. When on mode, fan
motor and magnetic switch is in standby mode. (power saving
function)
2) SELECT switch : Select CO2/ MAG/ M welding function (CV)
and gouging function (CC)
3) CRATER switch : self containing is activated in ON mode,
and enables to treat crater prior to completion of welding,
and the welding is available only when it is OFF and torch is
ON.
4) GAS check switch : On for checking gas volume, otherwise
select OFF.
5) WIRE (select wire diameter) switch : It balances voltage-
current according to the wire diameter for welding with same
voltage. (If the wire diameter is bigger, the feeding speed is
slow).
6) POWER LAMP : It turns on when the on/ off switch is ON.
(It indicates the welder is powered)
7) WARNING LAMP: It is turned on upon overheating and
overloading, and it stops operation. For restart, reset the
power switch.
8) CONTROL FUSE : use 5A fuse , for protection of control
circuit.
9) FAN FUSE : use 5A fuse , for protection of fan motor.
10) MOTOR FUSE(feeder motor fuse) : use 10A fuse, for
protection of feeder motor
11) CRATER C’ T VOLUME(adjust crater current) :It adjusts current
value when crater switch is ON, and adjusts gouging current
value when gouging is selected.
12) CRATER VOLT VOLUME(adjust crater voltage) : When crater