Telepass SAT | Installation Instruction v. 2.2 OCT 2018 | © 2016-2018 Autostrade Tech
23
PERMANENT UNIT INSTALLATION
Installation types
This manual explains how to install and permanently
connect the unit to the vehicle electrical system
(permanent installation).
Position on the windshield
20 cm
10 cm
Install in the windshield area as indicated below:
- within a 20 cm band, 10 cm over the idle windshield
wiper line
- between the windshield median line and center of
the steering wheel.
To identify the shielded windshield zones, please refer to
the vehicle documentation.
Unit structure
A
E
B
C
D
A
- LCD screen
B
- Backlit buttons
C
- Status LED (red/green)
D
- USB port (support service only)
E
- Power inlet
NOTICE
: never connect the unit to the USB port.
The USB port can only be used by support
technicians. Any intervention or alteration may
cause malfunctions of the e-toll payment system
and sanctions by the service provider.
Autostrade Tech SpA cannot be held liable for
improper unit use.
EN
