P.4
User Guide
Using
the
Remote
Control
Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two
independent vehicles equipped with a remote starter (see Multi-car operation section on page-
13). The functions of the transmitter are as follows:
LOCK: Locks the DOORS and arms
the STARTER KILL.
UNLOCK: Unlocks the DOORS and
disarms the STARTER KILL.
Activates the AUX 2 output if Priority
Door Access is configured.
TRUNK: Opens the TRUNK or
activates the AUX 3 output.
START/STOP: Remote start or stop.
Cold Weather Mode by pressing the
SHIFT button and then pressing and
holding the START/STOP button for
3 seconds.
SHIFT: This button serves as a
second function button. In
combination with the other four
buttons, this button allows to assign
different functions to those buttons.
Vehicle
Presets
Heater
When leaving the vehicle it is recommended to preset the accessory controls in preparation for the
next remote start. Settings for the blower motor (fan), front and rear, should not be left on HIGH. It
is recommended to leave the settings on LOW or MEDIUM instead.
Windshield
Wipers
&
Radio
&
Headlights
Certain vehicles require the radio and / or windshield wiper and / or headlight circuits to become
energized while running under remote start. When leaving the vehicle you must ensure that the
windshield wiper and headlight switches are OFF. Leaving the headlight switch ON on certain
types of vehicles could cause them to remain ON even after remote starter shut down, resulting in
a dead battery.
LED #2
LED #4
LED #3
LED #1
