User Guide
P.13
AUX
1
Note: This 500 mA negative Aux 1 output can be used for many different applications
Priority door:
This great feature allows the user to unlock solely the driver’s door with a single press of the
button on the transmitter, and to unlock the other doors, if desired, by pressing the
button for a
second time.
The output will provide a 1-second negative output when the
button is pressed a second time
on the transmitter.
Horn Confirmation:
AUX 1 can be programmed to trigger the horn every time the
button is pressed, or when the
button is pressed twice within 3 seconds. When horn confirmation is activated, panic mode is
enabled. If horn confirmation is disabled, panic mode will not be available.
Horn
Timing
Adjustment
The pulse duration can be configured by your installer (from 5 ms to 200 ms).
Multi
car
Operation
This option allows the owner of two vehicles, both equipped with the same Remote Car Starter
model, to control both systems with a single remote control.
To control the second vehicle:
Press TRUNK + LOCK buttons simultaneously:------------------------------------------------- LOCK
Press TRUNK + UNLOCK simultaneously:------------------------------------------------------- UNLOCK
Press TRUNK + START/STOP simultaneously:------------------------------------------------- START
Press TRUNK + START/STOP simultaneously:------------------------------------------------- STOP
Press
¾
¾
TRUNK:---------------------------------------------------------------- TRUNK
OR
Press
¾
¾
LOCK:----------------------------------------------------------------- LOCK
Press
¾
¾
UNLOCK:------------------------------------------------------------- UNLOCK
Press
¾
¾
START/STOP:------------------------------------------------------- START
Press
¾
¾
START/STOP:------------------------------------------------------- STOP
Press
¾
¾
TRUNK:---------------------------------------------------------------- TRUNK
Note: If the multi-level features have been modified from their default state by your installer,
the
button may have to be pressed once, twice or three times, according to the option
you chose.
OEM
Style
Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned into the
IGNITON ON position.
•
To arm the OEM-style alarm, press the
button on the transmitter.
-The OEM-style alarm will ONLY arm if the
button on the transmitter is pressed.
The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.
