User Guide
P. 3
Feature Confirmation Chart
Feature
LED #1
LED #2
LED #3
LED #4
Beep(s)
Lock 3
flashes X
X
X
1
Unlock X 3
flashes X
X
2
Trunk X X
3
flashes
X 1
Start X X X
3
flashes
1
Running X X X
3
flashes
3
Stop X X X
3
flashes
2
Entering Cold
Weather Mode
X
X
X
3 flashes
1...+ ... 2
Exiting Cold
Weather Mode
X
X
X
3 flashes
1... + ...1
Home Valet
3 flashes
X
X
3 flashes
2
Valet Mode
3 flashes
X
X
3 flashes
1
Exit Valet Mode
X
3 flashes
X
3 flashes
1
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle
i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
SHIFT
button
then press and release the
TRUNK
button (there will be a beep).
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle’s
status.
x
If the engine is NOT running
, refer to Table 1.
x
If the engine IS running under a remote start
, refer to Table 2 (if the doors are locked)
or refer to Table 3 (if the doors are unlocked).
The status request feature is a two-step procedure:
•
The first sequence of flashes denotes if the vehicle’s doors are locked or unlocked.
•
The second sequence of flashes (if applicable) denotes if the vehicle is
Cold weather mode
,
Home valet mode
, or,
Valet mode
.
•
If there is no second sequence transmission, that the vehicle is not in any of the three (3)
mentioned features (
Cold weather mode
,
Home valet
mode
or
Valet mode
).
Status Request When the Engine IS NOT Running
STATUS
SEQUENCE
LED #1
LED #2
LED #3
LED #4
Beep(s)
Lock
3 flashes
X
X
X
1
Unlock
X 3
flashes X
X
2
1
st
sequence if
locked
3 flashes
X
X
X
2
1
st
sequence if
unlocked
X 3
flashes X
X
2
Cold
Weather
2
nd
sequence X
X
X
1
second X
