AS-6205 SH
Installation Guide
P.3
Introduction
This Guide contains all information pertinent to the installation. Most (if not all) features are
grouped in the User Guide and therefore, should you need information on a feature, you
should refer to the User Guide
Included in the Package
Please review the Installation Guide before beginning the installation, particularly the Wiring
Schematic and the Programming Options.
It is very important that you familiarize yourself with the programming and the operation of the
system, even if you have already installed a similar system in the past. There are many great
features that may be overlooked if the manual is not read; this would prevent you from
maximizing the potential of the Module.
Prior to the installation, make sure that all the hardware components required to install the
system are in the box.
The following is a list of components included in the kit:
1 – Control Unit
1 – Super-regeneration monopole
receiver or Long-range super-
heterodyne receiver
2 – Multi-channel 5-button
Transmitters
1 – Plug-in dual-zone Shock Sensor
1 – Plug-in Push-button Valet Switch
1 – High-power 120-dB 6-tone Siren
1
–
six-pin 14 AWG Harness
(Ignition Harness)
1 – five-pin 18 AWG Harness (Main
Harness)
1
– twelve-pin 22 AWG Harness
(Accessories Harness)
1
–
two-pin 22 AWG Harness
(Accessories Harness)
1 – five-pin Harness (Data Port Harness)
1
–
Parts bag: a Hood Pin-switch, a
connector, wires and a warning label
1 – User Guide.
INDUSTRY CANADA USER NOTICE (Canada):
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication".
FCC USER NOTICE (U.S.A.):
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate
the equipment.
