P. 6
User
Guide
AS-1725 SH
Note
:
To stop Panic Mode before the end of its delay, press the
LOCK
or
UNLOCK
button until
the sound signal stops.
Quick Lockout
TM
(Also called
Secure Panic
.) For fast protection in emergency situations, the system will
LOCK
all
doors when you
press the brake pedal while you hear the sound signal
. (
Quick Lockout
is
only available when
Panic Mode
has been set off.)
Cold Weather Mode
When Cold Weather Mode is active, the engine starts every 2 hours and runs for 3 minutes (or for
8 or 20 minutes with diesel engines). Cold Weather Mode automatically ends after 24 hours.
To enter Cold Weather Mode:
•
Press and hold the
START
button for 3 seconds
... until the parking lights flash three times.
To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine by remote.
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
•
Press and hold the
START
button for 3 sec.
(the parking lights will flash once)
.
If Safe Start is enabled, you can activate Cold Weather Mode by
•
Pressing and releasing the
START
button, then
•
Pressing and holding the
START
button until the Parking Lights flash 3 times
To verify whether the system is in Cold Weather Mode:
•
Press and release the brake pedal:
If the vehicle is in Cold Weather Mode, the parking lights will stay on while the pedal is
pressed.
Extended Run Time
With the vehicle running under a remote start, pressing and holding the
START
button for more than
1 second will reset the run time counter to zero and restart the run time cycle from the beginning.
To stop the vehicle, at any moment, simply press the
STOP
button. This procedure can only be
carried out once per remote start.
Example:
if your Module is programmed for a run time of 3 minutes and your vehicle has been
running for 3 minutes already, pressing the
START
button will reset the counter to zero and the
Engine will run for another cycle (in this case, 3 minutes).
Advanced Features: Installation-programmable Options
The Remote Car Starter was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system in your
vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter.
Active or Passive Arming
The Starter Kill can be configured either to Passive Mode (so as to arm automatically) or Active
Mode (so as to require user intervention for arming). By default, your Remote Car Starter is
configured to
Passive Mode
. In Passive Mode, the Starter Kill and the OEM alarm will
automatically arm
60 seconds
after the last door is closed. The Remote Car Starter will not arm if
a door is left open, or if you re-open a door within the 60-second delay.
Important note:
When the Remote Car Starter re-arms automatically, you can disarm the
Remote Car Starter by simply pressing the
UNLOCK
button.
