Autoslide Elite, Руководство по установке

Страница: 9 / 36

THE FRICTION TEST
If the Velcro
…
Then
…
Stays intact Your door is ready for the
Auto
S
lide system to be installed.
Go to
the
next page.
Breaks during
the test Your door is not yet ready for the
Auto
S
lide to be installed. You
may need to improve the sliding
action with some maintenance.
Note: If the door is in good
working order but is too heavy,
you must upgrade to an Elite
Motor.
Contact Auto
s
lide about
upgrading at (833) 337-5433.
A simple friction test is used to confirm the drag
force of your door. This will determine if the
Standard Motor or the Elite Motor is needed to
open and close your door. Your sliding door must
be in proper working condition and run freely
along its track.
1. Close the door.
2. Wrap/loop the friction tester
around the sliding door handle
and secure the Velcro.
3. Pull on the Friction Tester with even force
to fully open and close the door 3 times .
Use the same force as you would to
normally open the door and assess.
Standard Motors
will have a
silver
barrel
Elite Motors will have a
black
barrel
The test strip is only
used on
Standard
units. If you already
have an
Elite unit,
this test can be
skipped.