[email protected] I www.autopot.co.uk I +44 (0)844 8581520
Plan views
and options
Suggested layout
• 1x 225 ltr FlexiTank or
rigid green 225 ltr tank
• 1x 16mm click-fit tank adaptor
& filter
• 1x 8 metres of 16mm pipe
• 2x 16mm in-line tap
• 1x 16mm tee connector
• 4x 16mm-6mm cross connector
• 4x 16-6mm tee connector
• 12x 1Pot trays & lids
• 12x 15ltr pot
• 12x AQUAvalve
• 1x 6 metres of 6mm pipe
• 12x marix disc
• 12x root control disc
12Pot system contents
Advice
225 ltr
FlexiTank
6mm pipe
16mm pipe
16 - 6mm cross connector
16mm in-line tap
16mm click-fit tank adaptor & filter
AQUAvalve
16mm tee connector
16-6mm tee connector
225 ltr
tank
635mm
810mm
7
According to the size of your system connect your
6mm/16mm pipe to relevant fitting or tank...
1Pot module
setup
instructions
Using your front instruction sheet, repeat the module set up instructions for the number of trays.
If you require any guidance
email - [email protected]
Advice
1
8
2
Put black marix
disc in pot
Allow your plants to establish for 7-10 days before turning system on
6
5
Position tray
so it is level
Insert root control
disc
Gold face up
Cut 6mm/16mm pipe
to appropriate length
Connect AQUAvalve
so ‘half moon’ is on
T section in the tray
4
1Pot module dimensions
350mm
245mm
Fill pot with medium
and pot up plants.
Water through pot
and allow to drain
outside the tray.
Place pot in the
tray, make sure it is
CLEAN!
Place lid over valve
onto tray
3
• Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10
days before turning your system on. This will encourage a stronger and healthier root system.
• Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when
there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.
• For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency
to block small pipe work.
• Clean all substrate from the bottom and sides of the pots before placing in each tray.
This will ensure your system is clean from the start.
• Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles,
coco/clay pebbles, rockwool/clay pebbles.
Remove collar
Push 6mm pipe through
collar and attach to
AQUAvalve nozzle
Rescrew collar -
DON’T
overturn...
when you
feel it grip
STOP
