1Pot setup
instructions
Using your front instruction sheet, repeat the module set up instructions for the number of trays.
If you require any guidance
email - [email protected]
Advice
1
8
2
Put black marix
disc in pot
Allow your plants to establish for 7-10 days before turning system on
[email protected] I www.autopot.co.uk I +44 (0)844 8581520
6
5
Position tray
so it is level
Insert root control
disc
Gold face up
3
Remove collar
Push 6mm pipe through
collar and attach to
AQUAvalve nozzle
Rescrew collar -
DON’T
overturn...
when you
feel it grip
STOP
Cut 6mm/16mm pipe
to appropriate length
Connect AQUAvalve
so ‘half moon’ is on
T section in the tray
4
Plan views
and options
8Pot system contents
1Pot dimensions
Advice
Fill pot with medium
and pot up plants.
Water through pot
and allow to drain
outside the tray.
Place pot in the
tray, make sure it is
CLEAN!
Place lid over valve
onto tray
• Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10
days before turning your system on. This will encourage a stronger and healthier root system.
• Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when
there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.
• For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency
to block small pipe work.
• Clean all substrate from the bottom and sides of the pots before placing in each tray.
This will ensure your system is clean from the start.
• Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles,
coco/clay pebbles, rockwool/clay pebbles.
Suggested layout
100 ltr
FlexiTank
6mm pipe
16mm pipe
AQUAvalve
16mm click-fit tank adaptor & filter
16mm in-line tap
16mm – 6mm cross connector
7
According to the size of your system connect your
6mm/16mm pipe to relevant fitting or tank...
• 1x 100 litre FlexiTank
• 8x 1Pot tray and lid
• 8x 15 litre pot
• 8x AQUAvalve
• 1x 16mm click-fit tank adapter
and filter
• 1x 16mm inline tap
• 4x 16 - 6mm cross connector
• 4 metres of 16mm pipe
• 4 metres of 6mm pipe
• 8x marix disc
• 8x root control disc
System requires minimum
100 litre FlexiTank (supplied)
100 ltr
FlexiTank
432mm
750mm
