7
6.4.
Indication of
heater operation,
when starting
source is the CIP
(direct or timer
start)
6.4.1 *
Off
6.4.2
On
6.5.
Indication of
heater operation,
when starting
source is additional
button
6.5.1 *
Off
6.5.2
On
6.7.
Flashing
frequency for 6.3-
6.5 Setup items
6.7.1
One flash within 3 sec
6.7.2
One flash within 5 sec
6.7.3
*
One flash within 10 sec
6.7.4
One flash within 15 sec
7.
Output
signals
adjustment
7.3.
Notification
signal feed to the
output “Alert_1”
7.3.1
*"Heater started"
4
7.3.2
"Heater stopped"
4
7.3.5
"Heater started to burn"
4
7.3.6
“Heating finished
7.3.7
"Error occurred"
7.3.8
Disable the output
7.4.
Notification
signal feed to the
output “Alert_2”
7.4.1
"Heater started"
4
7.4.2
*"Heater stopped"
4
7.4.5
"Heater started to burn"
4
7.4.6
“Heating finished
7.4.7
"Error occurred"
7.4.8
Disable the output
7.5.
Signal feed to
the output
“Status_Minus”
7.5.1
Heater operates (potential)
7.5.2
*Heater operates autonomously (from
battery, engine is off) (potential)
7.5.3
Hazard flashers control (double
impulses with the frequency adjusted by 6.7,
applying settings 6.1-6.5)
5
7.5.4
Engine runs (potential)
7.5.5
Engine runs (RPM impulses)
7.5.6.
Ventilation is on during the heater
operation (potential)
7.5.7.
Ventilation is off during the heater
operation (potential)
7.5.10.
Disable the output
7.6.
Signal feed to
the output
“Status_Plus”
7.6.1
*Heater operates (potential)
7.6.2
Heater operates autonomously (from
battery, engine is off) (potential)
7.6.3
Engine runs (potential)
