background image

 

 
 
 
 
 
 
 
 

 

Specs

 

 

Input voltage 

                                                         120 Volts AC 

Maximum amperage 

                           14.5 amps @ 120 VAC 

Temperature control range                                                45º to 95º F 

Separate Day & Night settings                                *photocell control 

Temperature accuracy 

                                                   +/- 5 ºF 

Temperature dead-band (hysteresis)                                           3 ºF 

Weight 

                                                                                 < 1 lbs 

Dimensions 

                                                          3

” x 6” x 3.5” 

APCET 

Temperature Controller  

                 

Содержание APCET

Страница 1: ... amperage 14 5 amps 120 VAC Temperature control range 45º to 95º F Separate Day Night settings photocell control Temperature accuracy 5 ºF Temperature dead band hysteresis 3 ºF Weight 1 lbs Dimensions 3 x 6 x 3 5 APCET Temperature Controller ...

Страница 2: ...Ds on the front of the unit will turn ON and OFF to show the user the current conditions of the APCET NOTE This unit is water resistant however Keep it away from water It is NOT WATER PROOF Installation Plug the unit into a standard NEMA 5 15 wall outlet A 120 volt power supply is required For more permanent installations the mounting tab at the top of the unit can be secured to a wall Ensure that...

Страница 3: ...d by the LED that remains illuminated Verify the Heat mode is ON Once the correct mode is selected the user can now set the desired temperature settings using the two knobs normally Changing Settings Use the knobs on the front of the unit to adjust the DAY and the NIGHT temperature settings The photocell will automatically use the correct setting depending on the lighting level When the temperatur...

Страница 4: ... unit is not being affected by other factors such as direct sunlight exposure or areas that may not have good air movement What if there is no power Ensure the unit is getting power Check the device that is connected to the unit by plugging it directly into a known power supply If the unit will not turn on and no LEDs will illuminate contact your distributor for repair and warranty issues Why are ...

Отзывы: