background image

9

If any of the following conditions exist while the system is operating, the 
engine will not start or will shut down immediately: 

1. The hood is opened. 
2. The brake pedal is pressed.

 

3. Engine is over-revved. {“Tachometer checking type” only}

 

4. The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed.

 

5. Press 

button  once  on  the  remote  transmitter  under  remote  start 

mode. 

6. The optional remote start enable toggle switch is in the OFF position. (If 

installed) 

7. The vehicle refused to start running after {3} unsuccessful attempts.

 

DISABLING THE REMOTE START SYSTEM:

   

(Toggle switch If installed) 

This  feature  allows  your  system’s  remote  start  unit  to  be temporarily 
disabled  to  prevent  the  vehicle  from  being  remote  started  accidentally. 
This  feature  is  useful  if  the  vehicle  is  being  serviced  or  stored  in  an 
enclosed  area.  To  disable  the  remote  start,  move  the  optional  remote 
start enable toggle switch to the OFF position. 

МSVMASTER - Установка и разблокировка охранных систем автомобилей - http://www.msvmaster.lv

МSVMASTER - Установка и разблокировка охранных систем автомобилей - http://www.msvmaster.lv

Содержание RSTKE-900










Отзывы: