11
1. Before turning off the engine, press the
button once on the transmitter and the LED indicator will flash
3 times to confirm enter.
2. Turn the ignition key to OFF position. (The engine will stay running.)
3. The engine will run until the pre-programmed time elapsed or shutdown input is received.
D. TURBO CHARGE MODE:
Turbo charger mode keeps the engine running after arriving at you r destination for a programmable period
of 1, 3 or 5 minutes, This allows the vehicle’s engine time to conveniently cool down the turbo after you have
left the vehicle.
To activate:
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, press and release
and
buttons at the same time.
-- The LED will flash indicating the remote start has entered the turbo charger mode
appear on
LCD remote .
3. Take the “Ignition Key” from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
--
Engine continues running until the pre-programmed time elapsed.
--
NOTE: This feature only applies to vehicles with Turbo Charged Engines.
E. TIMER START:
This unit can be programmed to start and run the engine every 3 hours or punctually at the same time next
morning, the engine will run for the programmed running time and then shut down.
IMPORTANT
: Timer Start should be used only in open areas, never start and run the vehicle in on
enclosed space as a garage or carport.
Daily Timer Start:
The feature is very useful for the driver who wants to run the vehicle punctually at the same
time next morning. Before set-up of the “Daily Timer Start”, you should set you time for engine start.( see
Timer Setting /
Timer set-up for “Daily Timer Start, in Advanced users Mode)
ENTER:
1. Press the
button once to remote start the vehicle. As soon as the vehicle is running and the parking
lights have turned ON or are flashing.
2. Immediately depress the
button once, within 2 seconds
3-a.
3 Hours Timer Start:
Rapidly depresses the
button (or depresses
+
buttons, if you program
+
buttons = Start / Stop button.) The parking light will flash (3) times /
icon appear. The siren
or horn chirps (3) times. The vehicle is now programmed to start every 3 hours.
3-b.
Daily Timer Start:
Depress the transmitter’s “
F
” button first, within 3 seconds press the
button. The
parking light will flash (6) times. The siren chirps (6) times. The vehicle is now programmed to start at the
same time of the next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD
scree n. After 3 seconds
icon stays displayed on the LCD screen.
Or Follow programmed Daily Start Timer on LCD remote in Advanced user mode.
Press
button of LCD remote transceiver to activate or cancel Daily Start feature.
3.
Press the brake pedal to stop the vehicle running.
4.
Please insure that you fully understand this feature before programming the timer start mode.
Exit the timer start:
Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The horn chirps (4) times. Or
1. Press the
button twice to remote start the vehicle. As soon as the vehicle is running and the parking light
have turned on or flashing.
МSVMASTER - Установка и разблокировка охранных систем автомобилей -
http://www.msvmaster.lv
МSVMASTER - Установка и разблокировка охранных систем автомобилей -
http://www.msvmaster.lv
