Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in several countries including
China, the trademark is
. With regard to the other trademark, service logo,
domain, icon and company name mentioned in this manual, they shall all belong to
AUTOOL and its other affiliated company, in other countries without the registration yet of
these trademark, service logo, domain name, icon and company name of AUTOOL, here we
announce they are owned by AUTOOL. Any company or person shall not use the trademark,
service logo, domain name, icon and company name of AUTOOL before getting approved
by AUTOOL with written certificates. Please visit our website www.autooltech.com or email
at [email protected] to contact us.
Attention
Non- technical person shall not change, disassemble or repair the product, otherwise
all losses caused by this shall be bared by the user himself.
Please do not scratch, bend, twist or stretch the wires. Do not place the wires in high
temperature. Do not press hard or decompose the on-board charging adapter.
Please do not place nails, pins, and other small debris on the charging port, in order to
avoid damaging the charging connector.
Do not place the product in unstable place such as high altitude area, slope, or shelf.
This product is powered by electricity and should not be used as a toy for children.
To avoid short circuit, do not immerse the product in water or other liquid.
Please try to use the power supply and power cord supplied by manufacturer as
standard.
Please do not expose this product to strong light or high temperature when it’s not at
use.
Getting Started
AUTOOL SDT 208 is a professional auto pipe leak detect tool. It will help us position
leakage on any pipe system quickly and exactly,such as EVAP system,Intake system,
exhaust system...and so on.
Main Unit Structure
SDT 208 is designed for detecting the leakage of pipe systems on cars, motorcycles, such
as fuel pipe, air intake system and cooling tank.
SDT 208 is for all pipe system and EVAP.
Cautions
1. When you use this detector the first time, please fill 20-30ml oil, not beyond this range.
2. Fresh oil can be filled with only when the smoke is light, and it can’t be filled over 15ml
every time.
3. Before filling fresh oil, please pour out the remaining oil in the detector.
4. Please replace the detector oil regularly.
