Autool EM315, Руководство пользователя

Страница: 8 / 14

Prohibit too high voltage. The power supply voltage is in the
“Technical Parameters” table. Under normal circumstances, the
voltage automatic compensating circuit in the welding machine
will ensure that the welding current is kept within the allowed
range. If the power supply voltage exceeds the allowed value,
the welding machine will be damaged. The user should fully
understand this situation and take appropriate preventive
measures.
Situation when standard load continuation rate is
exceeded:
If the welder exceeds the standard load
continuation rate during operation, the welder may suddenly
enter the protection state and stop the work. The excessive
heat triggers the temperature control switch, causing the
welder to stop working, and the red indicator light on the front
panel lights up. In this case, you do not have to unplug the
power supply, so that the cooling fan can continue to work to
cool down the welder temperature. When the temperature
drops to the standard range, the red indicator light is off, and
you can restart the welder.
Regularly blow off the dust with dry and clean compressed
air.
If the welder is used in an environment with heavy smoke
and air pollution, the welder should be cleaned and dry daily.
Regular check to the internal circuit connection of the
welder.
Confirm that the line is connected correctly, the joint is
firm (especially when the joint or component is inserted). If it is
found to be rusted and loose, please use sandpaper to polish
the rust layer or oxide film, reconnect and tighten it.
Avoid water or vapor entering the welder inside. If this
happens, the inside of the welder should be dried. You should
•
•
•
12
•
13
check the welder's insulation with a megohmmeter (including
the parts between the connection nodes,between the
connection point and the unit cover). The welding work can
only be continued if there is no abnormal phenomenon.
Store the machine. Please put the machine back into package
when the welder is not used for a long time, put it in a dry
environment.
•
•
Package List
Name Number Name Number
The main unit 1 Power cord with clamp for
welding (only used for EM325) 1
Power cord with
(+)clamp for
charging/starting 1 Power cord with (-)clamp for
charging/starting 1
Manual 1 Qualification certificate 1
Warranty
There are 3 years' warranty for AUTOOL product main unit and
1 year warranty for the accessories since the day the customers
have received the product parcel.