Autool EM315, Руководство пользователя

Страница: 3 / 14

3
Product Overview
2
Connect the positive (+) of the output cable to the positive (+)
of battery and the negative (-) of the output cable to the
negative (-) of the battery.
Never use a charging connection to start the engine, which will
easily burn the meter and generator.
When the starter cannot start the engine, please check if the
input power cord meets the relevant specifications, or check if
the power cord is connected.
If the work piece is too far away from the welder (50-100 m),
when the user chooses the extension wire for welding gun and
ground wire, please use a wire with a larger cross section to
avoid the cable voltage decrease.
Please do not experiment blindly or do careless overhaul,
which may result into more breakdown, making it more difficult
to perform normal repair& maintenance.
The exposed part of the machine is powered with a voltage
that can cause danger, any direct or indirect contact to that
may cause an electric shock accident, and a serious electric
shock will cause death.
Welding operations should be carried out in a relatively dry
environment, and the air humidity should generally not exceed
90%.
The ambient temperature should be between 10
℃
and 40
℃
.
Avoid welding in daylight or rain, and do not allow water or rain
to seep into the welder.
Avoid welding work in dusty areas or in corrosive
atmospheres.
Avoid gas-shielded welding operations in environments with
strong air flow.
•
•
•
•
•
•
•
•
•
This device only supports 12v battery charging. Before charging
12V batteries, the function switch should be set to Battery
Charger button.
This device only supports 12v vehicle jump start. Before starting
vehicle, press the function button to be set to Engine Starter
button. The po) and negative(-) power pole share both
charging and starting function.
Electric welding function: high efficiency, energy saving, light.
Stable ARC, easy to control the melt pool. High no-load voltage
and better energy thrust, can be used for a wide range of
material: stainless steel, alloy steel, carbon steel, copper and
other non-ferrous metals. The welder uses a variety of welding
rods of different specifications and materials, including acid,
alkaline and cellulose type welding rods, which can be used for
aerial work, indoor and outdoor decoration, etc. Compared with
domestic and foreign similar products, it has small size, light
weight and easy installation.
•
•
•
•
•