Autonics VG Series, Руководство пользователя

Страница: 7 / 126

Caution during Use
© Copyright Reserved Autonics Co., Ltd. vii
Caution during Use

Follow instructions in Cautions during Use. Otherwise, it may cause unexpected accidents.

24VDC power supply should be insulated and limited voltage/current or Class 2, SELV
power supply device.

In order to avoid malfunction from static electricity or noise, ground shield wire of the power
I/O cable.

Do not disconnect the power supply while setting operation or saving set information.
It may cause data loss.

Do not disconnect the power supply while updating firmware.
It may cause product damage.

Keep optical section of the sensor away from the contact with water, dust and oil.
It may cause malfunction.

When changing the light or filter, use the assembly tool and observe installation instruction.

When the sensor is not used for a long time, separate the power cable to store.

When connecting network, connection must be operated by technical expert.

In the following case, disconnect the power supply immediately. It may cause fire or product
damage.
①
When water or foreign substance is detected in the product
②
When the product is dropped or case is damaged
③
When smoke or smell is detected from the product

Do not use the product in the place where strong magnetic field or electric noise is
generated.

This unit may be used in the following environments.
①
Indoor (in the environment conditions in specifications)
②
Altitude max. 2,000m
③
Pollution degree 2
④
Installation category
Ⅱ