Autonics VG Series, Руководство пользователя

Страница: 63 / 126

6 Vision Sensor Program [Vision Master]
© Copyright Reserved Autonics Co., Ltd. 63
(5) Light
You can set whether to use inner LED light or not. (Use: /not use: )
Light is synchronized with trigger signal and exposure time.
Setting range is from the level 1 to 16.
Light level 1 Light level 8 Light level 16
(6) Focusing guide
Focusing guide makes adjusting image focus with the focus adjuster convenient.
After setting ROI of the sensing target and checking the focusing guide value, rotate the
focus adjuster to the point where the focusing guide value is the highest and fix it at the
point to use.
How to adjust focus with focusing guide.
1st Click focusing guide button.
Focusing guide ON( ) /OFF ( )
2nd In the image window, the focusing guide value and area is displayed on the master image.
Adjust the area to focus on. The higher the focusing guide value is, the clearer focus on the
image is.
3rd Click continuous snap ( ) on the toolbar on the top.
4th Checking consecutively taken images, rotate the focus adjuster to the FAR or NEAR
direction. Since initial setting is unknown, rotate the focus adjuster to both FAR and NEAR
directions and fix the adjuster at the point where the focusing guide value is the highest.
When sensing target is in near
→
rotate to the NEAR
direction.
Focus adjusting is finished. When sensing object is far
→
rotate to the FAR direction.