Autonics LP-S044 Скачать руководство пользователя страница 62

Страница: 62 / 93

System Screen

© Copyright Reserved Autonics Co., Ltd.

6.6.1

Time switch

When the designated time and day of the week, it turns bit device of connected device ON/OFF.
Maximum 8 bit devices which have consecutive numbers operate as time switch. It is able to set
operation time by each bit device.

Time switch function is also able to set at [Common]-[Time Action] menu of GP Editor.

Not desiganted ACTION(ACT) item displays action time as [??:??:??].

No.

Function and operation

①

Action number of time switch.

②

If there is no designated device as time switch bit device, ‘Device’ is displayed.

Touch this, numeral input key pad appears to input start time and end time.

No.

Function and operation

①

Touch desired day of the week. Shaded item (MON, WED, FRI) are selected.

②

Designate action start time. Touch this, input key pad appears.

③

Designate action end time. Touch this, input key pad appears.

Содержание LP-S044






























































































Результаты поиска

Содержание LP-S044

Отзывы:

Autonics LP-S044, Руководство пользователя, Страница: 62 / 93

Результаты поиска

Содержание LP-S044

Отзывы: