Autonics LP-S044 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 93

Autonics LP-S044 Скачать руководство пользователя страница 57

6

System Screen

© Copyright Reserved Autonics Co., Ltd.

57

6.4.7

Opening time

Menu for set time of open screen when supplying power.

No.

Function and operation

①

Set time of open screen.
Set range is from 0 sec to 60 sec.



0 to 9: Touch the desired time.



CLR: Cancel the set input, input cursor disappears.



ENT: Set the input value.

②

Displays the set time for switching from open screen to user screen.
Touch the time to reset, input cursor appears to set.

Open screen displays to check current basic information(firmware releasing date, and version).

6.4.8

Backlight

Designate back light off time.
If there is no touch on screen of LP until off time of backlight, LCD backlight is OFF. Backlight is
ON again when user touches it. In this case touching is only for backlight ON and the other
operation is not valid.

No.

Function and operation

①

Designate back light off time if there is no touch input.



0 to 9: Touch the desired time.



CLR: Cancel the set input, input cursor disappears.



ENT: Set the input value.

Set range is 0 min to 99min. If 0 is set, backlight is not OFF
Depending on the status from [System information device]–[Backlight control bit of read
device] in LP, it controls the designated operation.
Backlight setting and operation is available only when backlight control device is SET
(ON). If backlight control device is RESET (OFF), it does not operate irrespectively menu
setting.

②

Displays the set time for back light off.
Touch the time to reset, input cursor appears to set.

«
...
55
56
57
58
59
...
»

Содержание LP-S044






























































































Отзывы:

Нет отзывов