Caution during Use
© Copyright Reserved Autonics Co., Ltd.
vii
Caution during Use
Follow instructions in ‘Caution during Use’. Otherwise, it may cause unexpected accidents.
ABUS power and I/O power should be insulated by the individually insulated power device.
Power supply should be insulated and limited voltage/current or Class 2, SELV power
supply device.
Use the rated standard cables and connectors. Do not apply excessive power when
connecting or disconnecting the connectors of the product.
Keep away from high voltage lines or power lines to prevent inductive noise.
In case installing power line and input signal line closely, use line filter or varistor at power
line and shielded wire at input signal line.
For the stable operation, use shield wire and ferrite core, when wiring communication wire,
power wire, or signal wire.
Do not use near the equipment which generates strong magnetic force or high frequency
noise.
Do not touch the module communication connecter part of the base.
Do not connect or remove the base while connected to a power source.
For removing the terminal, body or base, do not operate units for a long time without it.
This unit may be used in the following environments.
①
Indoors
②
Altitude max. 2,000m
③
Pollution degree 2
④
Installation category II
