
ADS-RR(SR)-HK1-DS-IG-EN
maestro.idatalink.com
Kia oPtima witH naV witHout amP 2016-2017
Automotive Data Solutions Inc. © 2021
3
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from
aftermarket radio main harness to the HK1 T-harness and
match the wire functions.
STEP 2
• Remove the factory radio.
• Assemble the HK1 T-harness (connect CAM4 connectors as
shown in the diagram).
• Connect the factory radio harness to the HK1 T-harness.
STEP 3
• Plug the male BLACK 2 pin connector of your HK1
T-harness into the OBDII harness.
• Plug the OBDII connector into the OBDII of the vehicle,
located under the driver side dash.
STEP 4
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the backup camera RCA into the aftermarket radio (if
applicable).
• Plug the Data cable to the data port of the aftermarket
radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack
of the aftermarket radio (If there is no iDatalink audio input,
connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged
into the W/R port.
STEP 5
• Connect all the harnesses to the Maestro RR module then
test your installation.
4