BLADE-AL
PAGE 1-1
leD StatUS
DIaGnoStIcS
DUrInG ProGraMMInG
DUrInG reMote Start
WItH IGnItIon off
Flashing RED
Missing/wrong information from
fi rmware or vehicle
Incorrectly programmed
Incorrectly programmed or connected
Solid RED
Waiting for more vehicle information
Incorrectly programmed
Not programmed waiting for more
vehicle information
Flashing BLUE
Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid BLUE then OFF
Correctly programmed
Reset in progress
Reset in progress
OFF
No activity or already programmed
Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
MODULE DiAgnOSTiCS
iDEnTiFY VEHiCLE YEAr
1
Locate the Vehicle Identifi cation
Number (VIN) and identify the
10th character.
2
Match the VIN’s 10th character
to its corresponding year.
l > 1990
S > 1995
Y > 2000
5 > 2005
a > 2010
M > 1991
t > 1996
1 > 2001
6 > 2006
B > 2011
n > 1992
V > 1997
2 > 2002
7 > 2007
c > 2012
P > 1993
W > 1998
3 > 2003
8 > 2008
D > 2013
r > 1994
X > 1999
4 > 2004
9 > 2009
e > 2014
4
Y 1 N
5
3 A
5 T A L 8 D 5 R 0 X
Æ
FACTOrY rESET PrOCEDUrE
5
RECONNECT
all connectors.
Repeat programming procedure.
!
Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
1
DISCONNECT
cartridge from
remote starter.
2
PRESS AND HOLD
programming
button while re-connecting
cartridge to remote starter.
3
LED will fl ash red. Immediately
RELEASE
programming button.
4
LED will turn solid red for 2
seconds.
RESET COMPLETED
.
Page 14 of 14
BLADE-AL(DL)-VW1-EN
20140929
INSTALL GUIDE
www.bLADEUpDATE.com
Automotive Data Solutions Inc. © 2014
Doorlock Interface
Audi/VolkswAgen
Guides Français disponibles au www.bLADEUpDATE.com
Doc. No.: ##16713##
