AutomationDirect C-more EA9-T10CL, Руководство пользователя по оборудованию

Страница: 135 / 140

Chapter 5 - System Setup Screens
5-44
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Memory – Restore (cont’d)
Select the data file(s) to be restored by pressing the
appropriate data file button. The selection will be
highlighted. The data file can be either the Project,
Firmware
and/or
Recipe files
. The selected data is
restored to the internal built-in memory if there is no
SD card inserted into the SD1 slot.
Pressing the highlighted data file again will turn it off.
The
Next >> button will stay grayed out until at least
one data file is selected.
Any file type not available will be grayed out.
This is an example of a file selected to restore.
The selected file is highlighted.
The Next >> button is now enabled.
Pressing
Cancel
will return to the previous menu.
Press the Next button to continue.
NOTE: The following definitions are for the various file types that can be restored:
Project data – consists of the actual developed project data that is created in the C-more programming software
and includes all functionality, objects, screens, tag names, labels, comments, graphics, etc. Included in backup file
name StartupStorage.eas9.
Recipe data – consists of all the data values and labels that have been created for the various recipe sheets.
Includes all recipe sheets loaded to the panel. Only recipe sheets used in the project are loaded to the panel.
Firmware – consists of the operating system, firmware and run time files. Included in backup file name
StartupStorage.eas9.
Log data – consists of the Alarm Log, Message Log and Trend Data Logging files.
Restore
Cancel Next >>
Log
Total : 268 KB
Recipe
Total : 1 KB
System
Total : 16 MB
Project
Total : 172 KB
<< Prev.
1 2 3
Step–2 : Select Data Area to Restore
Restore
Cancel Next >>
Log
Total : 268 KB
Recipe
Total : 1 KB
System
Total : 16 MB
Project
Total : 172 KB
<< Prev.
1 2 3
Step–2 : Select Data Area to Restore