AutomationDirect C-more EA9-T10CL, Руководство пользователя по оборудованию

Страница: 125 / 140

Chapter 5 - System Setup Screens
5-34
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Memory Menu
The user’s project, Firmware and OS, log and recipes
files can be backed up to or restored from an SD
memory card (SD Card Slot 1 or SD Card Slot 2), or a
USB memory device. From this menu the user can also
clear the project log files. The user also has the ability to
clear the memory within the
C-more
touch panel.
Item No. Function Description Comments
1 Backup
Backup project, Firmware and OS, log &
recipe files to the following memory devices:
USB port - Type A: USB pen drive
SD Card Slot1 (All panels): SD card
SD Card Slot2 (12-inch & 15-inch): SD Card
Any USB 2.0 pen drive.
SD formats SD and SDHC are
supported. Capacity up to 32 GB.
The backup data files are created and
copied to a folder on the memory device
named “EA_Memory Copy.”
The project file is named
StartupStorage.eas9
“Log” and “Recipe” folders with the
appropriate data files are also created on
the memory device.
2 Restore
Restore project, Firmware and OS, log &
recipe files to the internal memory from one
of the following memory devices:
USB port - Type A: USB pen drive
SD Card Slot1 (All panels): SD card
SD Card Slot2 (12-inch & 15-inch): SD Card
A folder on the memory device named
“EA_Memory Copy” must exist
containing a file named “StartupStorage.
eas9”. The project data file is stored in
this file, and if the system data file was
backed up, it also will be stored in this
file. Any backed up log or recipe data
files will be located under the appropriate
“Log” or “Recipe” folders.
3 Clear Memory
Clear selected data files from the memory
of the following internal memory or external
memory devices:
Built-in FLASH Memory
USB port - Type A: USB pen drive
SD Card Slot1 (All panels): SD card
SD Card Slot2 (12-inch & 15-inch): SD Card
Can only clear project, log and recipe
data files of the Built-in FLASH memory.
Can clear entire contents or individual
data files of external memory devices.
4 Reset to Factory Default
The touch panel’s internal memory is set to
the original factory defaults.
Clears all project memory.
5 Main Menu
Press to return to the Main Menu screen.
NOTE: The Project is RESTORED to the panel from an external memory device. A project can be TRANSFERRED
to and SD card or USB memory from the programming software to be RESTORED to a panel that is not connected
to the programming software. This file has the .eas9 extension NOT the .eap9 extension of a projects SAVED from
the software.
4
3
2
1
5