Page 2
SR35-KPD-REM
– 1st Ed. – 7/9/2020
IP66 Remote Keypad User Guide
Connection and Operation
The remote keypad (SR35-KPD-REM) can be used to control, monitor and program up to 32 SR35 soft
starters.
The keypad is powered from the host SR35 starter and requires an Ethernet cable for communication
(Modbus RTU).
NOTE: As the remote keypad acts as the Modbus master, no additional masters may be
placed on the network. Failure to observe this restriction may lead to erratic behavior,
network failure and/or equipment damage.
Network Connection
For a configuration where there is only one SR35 unit (one-to-one), the remote keypad and SR35
starter can be directly cabled. See Diagram below:
NOTE: Keypad power must be enabled on the SR35 starter.
Scroll to DEVICE menu > KEYPAD
menu > KEYPAD PWR = ON
