Automation Technology MCS 1280 Series, Руководство пользователя

Страница: 88 / 93

86 MCS Manual Rev. 1.4
7 Save to Camera Save a calibration file into the camera buffer
8 Load from File Load a calibration file from the PC
9 Save to File Save the calibration file to the PC
10 Update Calibration Updates the calibration to the currently used camera
configuration
11 Clear Calibration Remove the current calibration file from cxExplorer
When a calibration is loaded into the cxExplorer, either from the camera buffer (Load from
Camera) or from a file from the PC (Load from File), the mm button in the LinePlot View and the
Statistic View will be available. It might be necessary to push the magnifier of the Image View to
refresh the tools.
Further the tip of the pointer will now show the current position in millimeter.
cxSDK
With the help of the cxSDK the calibration can be easily downloaded programmatically from the
camera (cx_downloadFile()) and applied to a range map. To generate a calibrated point cloud use
cx_3d_range2calibratedABC() or to get a calibrated ZMap use cx_3d_range2rectifiedC(). Please
refer to the Visual Studio solution examples inside the cxSDK.
cxShow3d
The cxShow3d is a graphical user interface for displaying offline calibrated point clouds. For this
purpose the calibration should be downloaded and saved with the help of the cxExplorer as well
as a range image in Tiff format. Afterwards both can be loaded in the cxShow3d to get a
reconstructed point cloud or to generate a ZMap (rectified C image).