DPM1-P User Manual, 1st Edition
User Manual - DPM1-P Series Panel Meters
17
inP
.
.
.
.
.
.
.
.
.
Enter secret code to access this routine (default code is 0000).
If secret code is forgotten, proceed to load default configuration
to have access to lock-out configuration again.
Previous settings will be lost
.
Allows to change secret code
selecting 'YES'
Total lock-out of parameters
Menu partial lock-out.
0= unlocked
1= locked-out
Mode menu lock-out
SETPOINT1 menu lock-out
SETPOINT2 menu lock-out
SETPOINT1 value menu lock-out
SETPOINT2 value menu lock-out
Serial output menu lock-out
.
Analog output menu lock-out.
(only appears if ANAP is installed. Only
in this case serial output menu does
not appear).
Run Mode
>3s
ENTER
:
Enters configuration and
validates data and parameters.
UP:
Increases value of blinking digit in configuration
mode.
SHIFT:
Selects mode or shifts blinking digit in
configuration.
(Bottom View)
