Automatic Systems TriLane TL Series, Техническое руководство

Страница: 28 / 46

p. 28 /46
TLxx-MT-EN-04
7.3.2. m
otoriSation option
In the motorisation option, a gear set is inserted into the kinematic assembly between the plate and the rollers.
The gear motor is controlled by the AS1636 electronic circuit board connected to the AS1635 control electronics by
a CAN bus and can act in two cases
(subject to an option) :
• In a passage cycle, the AS1636 circuit board activates the motor as soon as a rotation of the turret is detected
by the angular sensor. The passage cycle starts with a manual action
(pressure on the horizontal arm) and
continues automatically by engaging the motor. The parameters available in the memory on the AS1635 circuit
board make it possible to define the starting angle of the motor, as well as the acceleration and deceleration
curve to complete the 120° rotation. Refer to the AS1635 technical manual for more details. The kinematic
assembly is not equipped with the centring device or the damping option, because the rotational movement is
controlled entirely by the motor control electronics.
• The motor is also used to allow automatic rearming of the arm, without human intervention.
2
1
Fig. 23 Motorisation option
Reference Description Comment
1 Motor support
2 Gear motor
7.3.3. tof
camera detection option
A TOF camera can be installed (option) on a stainless steel profile to be fixed between the two legs of the trilane. This
camera is used to detect intrusion and fraud occurrences.
3 holes are drilled on each vertical
post to fix the TOF support and
connect the cable to the logic board:
template available GAB-E-0104655
The TOF camera must be
installed with the small rectangle
on the top side and oriented 5° in
direction of the controlled entry
Fig. 24 TOF camera option on TL2