Automatic Products SNACKSHOP 113, Инструкция по эксплуатации

Страница: 10 / 57

Figure 7. LOCATION OF PRODUCT PUSHER
ON SPIRAL.
10. BAGGED OR BOXED ITEMS in the 10-selection shelves
if not loaded properly could be a problem. The sealed
edge of the bag may get under the spiral wire causing the
product to hang up after it has been vended. It is recom-
mended that the lower edge of these types of product be
folded forward and up (see Figure 8) next to the product
before inserting into the spiral space. It is also recom-
mended to use an 18 count spiral for bagged items
because of the product settling to the bottom of the pack-
age.
11. CIGARETTE VENDING FROM SNACKSHOP 113:
Cigarettes can be vended from the candy shelves using the
(15 capacity) spiral for the soft pack regular, king, 100mm or 120
mm packs. The (12 capacity) spiral should be used for (box)
packs.
12. LOCK PRODUCT SHELVES. After all the product has been
loaded be sure all shelves are returned to their vend position
behind the front roller guide.
13. INSTALL PROPER PRICE TABS into price tab holder for each
selection in the main product area.(See Figure 9.)
14. LOADING GUM AND MINT. The Gum and Mint shelf is located
below the Snack Shelves (optional). Unlatch the shelf by pulling
forward the two metal latches located to the right and left of the
shelf and pull forward.The cover can be pushed back to the rear
for easy loading.The shelf contains four individual selections.
The first selection on the left contains two fillers for use with thin
mints. (Rolaids - Certs, etc.). These fillers can be removed for
standard gum or mints.
Figure 8. FOLD BAGGED ITEMS BOTTOM
EDGE FORWARD AND UP.
Figure 9. INSTALLING
PRICE TABS
The two selections on the right of the Gum and Mint shelf also
have fillers. These selections can be used for standard size gum
and mints or the fillers may be removed for larger gum and mint
products.
Each selection has a display hinge assembly which should be
adjusted after the shelf is loaded. To adjust the display hinge,
loosen the wing nut and slide the spring hinge of the flipper over
the second product and fasten tightly.
6
installation