Automatic Products SNACKSHOP 111 Series, Инструкция по эксплуатации

Страница: 18 / 61

14
cleaning
optional equipment
1.VENTILATING FAN: (Part #660441 -120 Volts)
(Part #660441-1 - 240 Volts) Export
The ventilating fan keeps a steady flow of air moving through the
vendor cabinet.Installation of the fan takes only a few minutes. All
the vendors are wired with a fan plug on the junction box for easy
installation.
2. BASE KITS:
(Part # 660146-7)
Base kits are available to make the vendor compatible with
other manufacturers.
3. GUM AND MINT:
Gum and Mint units are available as an option with Snackshop
111-112 vendors. For information pertaining to loading or servic-
ing gum and mint unit, refer to this service manual for loading
instructions and for service instructions.
4. SPECIAL SPIRALS (112 ONLY):
Special candy spirals are available for use in the four (4) selec-
tion snack shelves on 112 machines only. For the sake of identi-
fication, the back end of these spirals are colored RED and
should never be used in the eight (8) selection candy shelves.
These spirals allow vending products that are too wide for the
standard candy columns but may be too thin for the regular snack
spirals. A product pusher and spacer should be used where
required. Part numbers for these special spirals are as follows:
400139-1 12 space special spiral
400140-1 15 space special spiral
400141-1 18 space special spiral
400142-1 24 space special spiral
400143-1 30 space special spiral
400151-1 20 space special spiral
NOTE:The difference between the standard candy spiral and the
special candy spiral used in the wide snack columns is in the
overall length of the spiral. The special spiral is shorter than the
standard candy spirals.
CAUTION: Do not attempt to use the special candy spirals in an
eight (8) selection shelf.
5. SOUP DISPENSER 111: (Kit 750083-1)
A canned soup dispenser is available as an option for use inthe
four selection snack shelves. The dispenser is easy to install and
holds up to seven cans in the unit.
SOUP DISPENSER 112: (Kit 750083)
A canned soup dispenser is available as an option for use in the
four selection snack shelves. The dispenser is easy to install and
holds up to nine cans in the unit.
6. DOLLAR BILL VALIDATORS:
The validators take only a few minutes to install and may be pur-
chased through the manufacturer of that unit.Mars has a 24 volt
& 115 volt validator available which will work in the machine pro-
vided that you use the right harness. The 115 volt harness can be
ordered from Automatic Products under part #680475. The 24
volt harness can be ordered under part #680355. ARDAC valida-
tors need a kit supplied FROM ARDAC under part #48X600-4 to
be added to the 111-112 machine. Coinco validators can also be
used, which are the 115 volt model (BA30SA) or the 24 volt
model (BA32SA).
7. DEBIT CARD READERS:
The 111-112 series machine will also have the option to add a
debit card reader.
8. CHILLED AIR MACHINE:
The 111-112 machine may be ordered with a refrigeration unit
which allows the inside of the cabinet to be cooled.THE REFRIG-
ERATION UNIT CANNOT BE ADDED TO A MACHINE AT A
LATER DATE..
9. DUAL SPIRAL SHELF:
Snack shelves can be set up to have dual spirals per selection on
the shelf. The dual spirals will help vend specialty items better.
10. CONVERTIBLE SHELF:
The convertible shelf allows you to convert a snack shelf into a
combination candy and snack shelf. The convertible shelf can be
converted from two to eight candy selections. (Example: 4 candy
selections & 2 snack).
11. 115 Machine:
This unit is used in conjunction with a 114 master machine. The
115 operates from the selector panel of the 114 master. Since the
115 machine has no control panel, the shelves are identical to the
113 models. (interchangeable) The 115 machine can only be pur-
chased with six shelves as a 30 selection machine (all snack
shelves) or a 35 selection machine (five snack shelves and one
candy shelf). The 115 machine can not have the following
o p t i o n s : Gum & minttray—Chilled machine or come in
Eurostyling.
The Snackshop 111-112 will clothe best merchandising job for
you if it is kept clean.The display window can be cleaned with
any good glass cleaner. The exterior and interior surfaces
should be cleaned with warm water and mild detergent. Rinse
thoroughly and dry all surfaces.
CAUTION:
Do not use any cleaners containing silicon as
this could cause electrical failures.
The main product shelves can be best cleaned with the spirals
and product spacers removed. Refer to page 5 for removal of
spirals and page 6 for removal of the product spacer.
Clean the acceptor on the changer frequently as accumulated
dirt in this area can cause coins to hang or not be accepted.
Follow recommended cleaning procedures as described by the
manufacturer.
12. MIS Printer (Part # 380310)
Printer Harness (Part # 680577)
DEX-OCS Harness (Part # 680509)
All three are needed for printer use (mode 501)