Automated Signature Technology Ghostwriter, Руководство пользователя

Страница: 8 / 41

800.636.4450 www.signaturemachine.com
Light board & illuminated signing plate
The Light Table is located under the Ghostwriter. This table contains an illuminated area that is
positioned under the writing arms. The machine signs within this area. The Light Board is not required
for machine operation and may be removed if necessary.
Rocker arms
The rocker arms connect the writing arms to the machine.
Spring clips
Spring Clips are located at the ends of the rocker arms and hold the ends of the writing arms.
Adjustable Writing Arms.
(#2 on diagram) The adjustable writing arms are unique to the
SigTech 4000. These writing arms are comprised of a right side (short side) and a left side
(long side). The right side has a pivot bearing on the end and a ball bearing on the other.
Pressure adjustment strip
The pressure adjustment strip is the stainless steel strip that follows the pen during the signing motion
applying pressure to the pen. This strip can be bent to change the pen pressure from light for a felt tip
pen to heavy for a bold signature from a ball point pen.
"T" bar
The "T" Bar picks up the writing arms. The “T” bar is adjusted through the “Set Pen Height” setting.
Pen holder
The pen holder on the writing arms holds the writing instrument during signature reproduction Two thumb
screws on the sides of the pen holder tighten to secure the pen or other instrument in the pen holder. The
4 Automated Signature Technology
Rocker Arm
Spring Clips
Writing Arms
Pressure Adjustment Strip
“T” Bar
Pen Holder
Writing Head