Automated Signature Technology Ghostwriter, Руководство пользователя

Страница: 19 / 41

www.signaturemachine.com 800.636.4450
Automated Signature Technology 15
Gold Service Plan (available in most metropolitan areas)
Factory repair with on-site preventive maintenance and unlimited telephone and e mail support
Covers all parts, labor and shipping costs. Machines will be repaired in our factory within two business
days or a replacement machine will be shipped to you in its place. Annual, scheduled preventive
maintenance will be performed in your office by one of our technicians. During the servicing of the
signature equipment, we will clean, lubricate, make all necessary adjustments, and replace any parts
needed for the proper operation of the machine, and repair or replace any worn components.
Silver Service Plan
Factory repair and unlimited telephone and e mail support
Covers all parts, labor and shipping costs. Machines will be repaired in our factory within five business
days or a replacement machine will be shipped to you in its place.
Part 5: Troubleshooting
LCD displays “Sensor out of range” error
Turn the machine off and back on. Machine should recalibrate and return to normal. If problem is not
resolved. Contact technical support.
The writing arms stick to the "T" bar
The bottom of the arm can become worn and may need to be smoothed and lubricated. Any
common light oil helps.
The writing arms pop out of the clips on the rocker arms
Remove the ball from the clip and squeeze the clip together with the rocker arm. This will tighten the
clip and hold the arm in the holder.
The pen makes scratchy noises while signing
Check the pen for any damage to the tip. Rolling ball, fountain and felt tip pens can become
damaged and it will effect the quality of reproduction. You can also decrease the pressure on the
pen by removing the pressure strip or bending it up.
Signing area is not illuminated
Check to make sure that the machine has power and is on.
No power
Check to make sure that the power cord is plugged securely into the module on the
back of the machine and into a live wall outlet. If the machine has power to the LCD and foot pedal,
contact technical support.