Automated Logic MX16160, Технические инструкции

Страница: 7 / 7

Revised 9/13/00 • MX16160 7 © 2000 Automated Logic Corporation
Troubleshooting
LEDs
The MX16160 module has several LED
indicators to show the status of certain
functions.
Power - lights when power is being supplied
to the module.
Run - flashes to indicate a normal condition.
Expander Comm - flashes to indicate
expansion bus communications are valid.
Digital Output Status - lights when the digital
output is activated.
Protection
The MX16160 module is protected by internal
solid state Polyswitches on the incoming
power. These Polyswitches are not
replaceable and will reset themselves if the
condition that caused the fault returns to
normal.
Production Date
To determine when a module was
manufactured, check the module status
report for the module in SuperVision. Refer to
the
SuperVision User’s Guide for more
information about the module status report.
A sticker on the back of the module also
shows the date the module was
manufactured. The first three characters on
the sticker indicate the type of module. The
next two characters show the year and month
of manufacture. (The month digit is in
hexadecimal.)
UI 8
Thermistor 38
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 38
0 to 20mA
0 to 5V
§ §
Digital 28
UI 9
Thermistor 39
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 39
0 to 20mA
0 to 5V
§ §
Digital 29
UI 10
Thermistor 3A
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3A
0 to 20mA
0 to 5V
§ §
Digital 2A
UI 11
Thermistor 3B
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3B
0 to 20mA
0 to 5V
§ §
Digital 2B
UI 12
Thermistor 3C
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3C
0 to 20mA
0 to 5V
§ §
Digital 2C
UI 13
Thermistor 3D
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3D
0 to 20mA
0 to 5V
§ §
Digital 2D
UI 14
Thermistor 3E
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3E
0 to 20mA
0 to 5V
§ §
Digital 2E
UI 15
Thermistor 3F
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 3F
0 to 20mA
0 to 5V
§ §
Digital 2F
UI 16
Thermistor 30
-17° to 213° F
-27° to 100.6° C 0.00
0.00 15.88
15.69
mA or Volts 30
0 to 20mA
0 to 5V
§ §
Digital 20
† Celsius values can only be displayed in SuperVision when the Function
Block is made in Eikon v2.0 or later with the Metric option enabled. Refer to
the Eikon User’s Guide for more information.
§ Use the Point Configuration or Point Help feature available in SuperVision
v2.0 or later.
Table 4. Input Channel Numbers
Point Signal Type
Channel
Number
†Range Offset Gain