AUTOMATED EQUIPMENT McDonald's DF22, Руководство по эксплуатации оборудования

Страница: 20 / 37

DF22 Dispenser
Copyright © 2005 Automated Equipment LLC All Rights Reserved
20
Controller Functions
Function List
The following is a complete list of the available functions. Functions are detailed on the following pages.
Function
Number
Function Name
Function Description
1 restart_function Same as Dispense / Reset Button on front panel.
2 display_last_error Shows the code for the last error that occurred.
3 weigh_disable Toggles the Weighing Cycle on and off.
4 tare_function Sets the default zero to the current A/D value. Make sure the
Accumulator Doors are empty.
5 calibrate Accepts a 1 lb./16oz (450gm) reference weight; sets the .75 lb./12 oz.
(350 gm), 1.0 lb/16 oz. (450 gm) and 1.5 lb./24 oz. (750 gm) targets.
6 adjust_Pos1_up Adjusts selector switch position #1 (.75 lb./12 oz./350 gm) target
upward in increments of 1 oz. (25 gm).
7 adjust_Pos1_dn Adjusts selector switch position #1 (.75 lb./12 oz./350 gm) target
downward in increments of 1 oz. (25 gm)
8 adjust_Pos2_up Adjusts selector switch position #2 (1 lb./16 oz./450 gm) target upward
in increments of 1 oz. (25 gm).
9 adjust_Pos2_dn Adjusts selector switch position #2 (1 lb./16 oz./450 gm) target
downward in increments of 1 oz. (25 gm)
10 adjust_Pos3_up Adjusts selector switch position #3 (1.5 lb./24 oz./750 gm) target
upward in increments of 1 oz. (25 gm)
11 adjust_Pos3_dn Adjusts selector switch position #3 (1.5 lb./24 oz./750 gm) target
downward in increments of 1 oz. (25 gm)
12 watchdog test Locks up the program so that the watchdog timer fires. Invokes error
#2.
13 load_cell_readout Displays the current reading from the Load Cell (live display,
uncalibrated).
14 actuate_Doors Opens and closes the Accumulator Doors.
15 actuate_Drum Turns the Drum Motor on and off.
16 actuate_lights Turns the control panel lights on and off.
17 restore_defaults Clears the error log and sets default weighing parameters.
18 clear_errors Clears the error log.
19 error_counts Displays the error log.
20 parameters Displays the default weighing parameters.
21 set units Sets weighing units to ounces “US”, or grams “In” International.
22 exercise mode Enables exercise mode, all subsystems cycle.
23 rev Displays revision level of installed EPROM