Autoleads ADI-100, Руководство пользователя

Страница: 24 / 32

24
Attention
The ADI-100 comes with the AFC function. In order to use this function, your car radio must
have AF (alternative frequency) feature, and AF must be enabled. Please consult your car
radio manual or the car dealer for these requirements before using this function.
While working with the AFC function, the possible factors that could affect its normal
operation are:
1. The FM sensitivity varies among car radios and the sensitivity can affect AFC’s
performance.
2.
The algorithm implemented in each car radio’s AF feature varies and this can affect
radio’s FM frequency tuning when triggered by AFC.
If AFC function is unable to function normally, please disable AFC and use AutoScan mode
instead. Refer to the next section To enable AutoScan
To Enable AutoScan
If your car radio does not have AF feature, then you must not enable AFC. However, you
can use AutoScan to automatically search for unused FM frequency for transmitting.
When this function is activated, the ADI-100 will keep searching available FM frequencies,
and display these frequencies whenever you need. You may select one of them as the
new transmitting frequency and tune your car radio in this new FM frequency to receive
DAB services continuously.
1. In the menu function, rotate the Rotary Knob
( t ) / ( u )
until the screen shows
( LINKMODE ).
2. Press the Rotary Knob, and then rotate the Rotary Knob
(
t
) / (
u
)
until the screen
shows ( AUTOSCAN ).
3. Press the Rotary Knob, the function of AutoScan is now enabled and the ADI-100
is operating in the AutoScan mode.
Note:
Switching to the AutoScan mode does not change the current FM transmitting
frequency as it remains the same as before the switch.
Switching to the AutoScan mode, it disables the AFC function.