Autoleads ADI-100, Руководство пользователя

Страница: 23 / 32

23
To Enable AFC (Automatic Frequency Change)
If your car radio does not have AF feature then please refer to To Enable AutoScan.
It may become necessary to change the FM transmitting frequency as you drive into an area where the FM
frequency transmitted by ADI-100 is used by an FM broadcaster. ADI-100 has an AFC function that allows
you to continuously listen to DAB programs through your car radio system without the need to change the
FM frequency manually. (Subject to car radio compatibility)
To perform this AFC function, your car radio must have AF (Alternative Frequency) feature and the AF fea-
ture of your car radio must be activated. When the AFC function of ADI-100 is enabled and the AF feature
of your car radio is activated, your car radio will tune to an unused FM frequency automatically when you
drive into an area where the original FM frequency for DAB is no longer available.
Furthermore, there are two AFC modes, AFC_H (High Sensitive) & AFC_L (Low Sensitive). While in AFC mode,
ADI-100 will detect and determine if a frequency change is necessary constantly. Set AFC_L mode, if you
experience the FM frequency is being changed too often, and set AFC_H mode, if you often hear static
noise and the FM frequency is not changed.
By default ADI-100 is already set to use AFC_H mode; however, if you want to change or return to AFC
mode, do the following:
Setting on Car Radio
1. Enable the Alternative Frequency feature of your car radio (Consult your car radio manual or the
car dealer if your car radio has the AF feature, and how to enable AF feature).
Note:
If your car radio does not have AF feature, the AFC function must not be
enabled, and refer to To Enable AutoScan.
If the AF feature of your car radio and ADI-100’s AFC function are not
compatible, the AFC function must not be enabled; instead, refer to
To Enable AutoScan.
The system default is AFC_H mode enabled.
If you hear static noise or a FM program and before AFC tunes to a clear
frequency you can force an immediate frequency change manually, refer
to the procedure outlined in the TROUBLESHOOTING section for detail
While in AFC mode, if the FM transmitting frequency for ADI-100 and the car
radio listening frequency is out of sync and you wish to reset them, refer to the
procedure outlined in the TROUBLESHOOTING section for detail.
Setting on ADI-100
1. In the menu function, rotate the
Rotary Knob
(
t
) / (
u
) until the screen shows( LINKMODE ).
2. Press the
Rotary Knob,
and then rotate the
Rotary Knob
( t ) / ( u ) until the screen shows (AFC_H )
or ( AFC_L ).
3. Press the
Rotary Knob,
the AFC function is now enabled and the ADI-100 is operating in the
AFC mode.