background image

 Plus Wind   Close 

 Operation and 

 Handbook

True/Apparent Wind Selection

 momentarily to alternate (toggle) between true or apparent wind.

Once selected a solid marker appears above the selection.

CAL

D

 wind speed and direction

True wind speed and direction

Note:
If vessel speed is not available on the 

 bus when true is selected, the

LCD will display a series of dashes and   pointer will continue to show the
apparentwind direction.

Illumination

The ST50 Plus 

 has three levels of illumination plus off.

1 .

 for 1 second to display the current illumination level.

2.

 within 8 seconds to selectthe required level: L3 High, L2

Medium,   Low and LO off.

Note:

The LCD display will return to normal operation 8 seconds after the last key

press.

Chapter 5: CODE Lock Security

5.1 

 Code

The ST50 Plus range of instruments is equipped with a security code feature
(called ‘CODE Lock’) to protect your system against possible theft. Entered

using the keypad on digital instruments, this is a four figure number of your

choice that can be entered at every power-up or, alternatively, transmitted

automatically on the 

 bus when there is a secure belowdecks master

instrument.
The analogue ST50 Plus Wind will only respond to transmissions on the

 bus -a security code cannot be entered from this unit. Once a 

code has been transmitted to this unit 

 not operate until   correct code

number has been received from the master instrument.

Please refer to a digital instrument handbook for complete details on the

CODE Lock security system.

Correct security code received

incorrect security code or

master missing

Содержание ST50 PLUS



















Отзывы: