8 |
P a g e
IMPORTANT NOTE:
The Master changeover operates in conjunction with both KVM and DATA
changeover buttons from their current state. Hence when the Master changeover
button is activated both KVM and DATA changeovers change state from their
current position. Because of this it is possible to get out of sync if operating the
unit remotely. Users should make sure before a show that when the PC2 button is
pressed both DATA and KVM buttons are illuminated.
7.
Status Display Indicator
This LCD display provides information as to the outputs and health status of the XUSB-
2. Each time an input contact is activated the display registers the MIDI event
generated. The display will also indicate PSU faults and default MIDI channel
assignment.
8
Mains IEC connection
The XUSB-2 requires 110Vac – 240Vac at 50Hz main supply.
9
Remote Connector
This four pin XLR connector allows for remote changeover of the system and an
additional latching relay output for changeover of further connected units.
Pins 1 & 2
provide a momentary contact allowing changeover of the PC2 master
changeover function.
Pins 3 & 4
provide a latching relay output which is closed when PC2 master
changeover is activated.
10
VIDEO output A & B
These 15pin VGA connectors provide dual head VGA outputs from the KVM switch.
11
VIDEO inputs 1A&B and 2A&B
These 15pin VGA connectors provide dual head VGA inputs to the KVM switch. VGA
from PC1 should be connected to 1A and 1B. PC2 connected to 2A and 2B.
12
USB Console Connectors
These connectors allow connection of a USB mouse and Keyboard that will be switched
between PC1 and PC2. Other USB devices may work but are not supported at this time.
13/14 Keyboard & Mouse USB Connections
These connections should be made to PC1 and PC2 respectively. They facilitated the
keyboard and mouse control of both PC’s. DATA control is transported by an additional
USB cable and connected to the DATA/GPI ports (20/21).
15
GPI Connector
This connector allows for additional General Purpose inputs that can be used to control
additional effects. The connector is wired to allow use of standard Analogue Audio
Dtype cables.
Pin Function
Pin
Function
