AUTOGEN BC-2B Скачать руководство пользователя страница 1

Original Language Version

TWO BANK 6/12V 2 X 5AMP AUTO

MAINTENANCE CHARGER

MODEL NO: BC-2B

Thank you for purchasing from AUTOGEN. Manufactured to a high standard, this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

Refer to

Wear eye

Wear

Warning:

Protect

Use in

Keep away

Warning!

Warning!

instruction

protection

protective

electricity

from

well

from sources

corrosive

manual

gloves

rain

ventilated

of ignition:

substance

areas

battery could

explode

1. SAFETY

1.1.

ELECTRICAL SAFETY

WARNING!

It is the user’s responsibility to check the following:

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and

all electrical connections for wear and damage. AUTOGEN recommend that an RCD (Residual Current Device) is used with all

electrical products.

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable

Appliance Test) tested.

Electrical safety information - it is important that the following information is read and understood.

1.1.1.

Ensure that the insulation on all cables and on the appliance is safe before connecting to the power supply.

1.1.2.

Regularly inspect power supply cables and plugs for wear and damage and check all connections to ensure that they are secure.

1.1.3.

Important

: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the

correct fuse - see fuse rating in these instructions.

DO NOT

pull or carry the appliance by the power cable.

DO NOT

pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a firm

grip on the plug.

DO NOT

use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or

replaced immediately by a qualified electrician.

1.1.4.

This product is fitted with a BS1363/A 13 Amp 3 pin plug.

If the cable or plug is damaged during use, switch off the electricity supply and remove from use.

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug and contact a qualified electrician. Class II

products are wired with live (brown) and neutral (blue) that only marked with the Class II symbol;

A) Connect the BROWN live wire to the live terminal ‘L’.

B) Connect the BLUE neutral wire to the neutral terminal ‘N’.

C) After wiring, check that there are no bare wires and ensure that all wires have been correctly connected.

Ensure that the cable outer sheath extends inside the cable restraint and the restraint is tight.

DO NOT

connect either wire to the earth terminal.

AUTOGEN recommend that repairs should be carried out by a qualified electrician.

1.2.

GENERAL SAFETY

DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION.

THUS, IT IS VERY IMPORTANT TO READ AND FOLLOW THE INSTRUCTIONS CAREFULLY WHEN YOU USE THE CHARGING

EQUIPMENT.

Follow the instructions of AUTOGEN, and any equipment/vehicle you intend to use. Remember to view warning marked on all

products and engines before you operating them.

WARNING!

Modern vehicles contain extensive electronic systems.

You are required to check with the vehicle manufacturer, for any specific instructions regarding the use of this type of equipment on

each vehicle.

No liability will be accepted for damage / injury, where this product is not used in accordance with all instructions.

1.3.

PERSONAL PRECAUTIONS

Ensure there is another person within hearing range of your voice and close enough to come to your aid, should a problem arise when

working near a lead-acid battery.

Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.

Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool, clean

running water for at least 15 minutes and seek medical attention immediately.

Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current

which is high enough to weld a ring or the like to metal, which would cause severe burns.

Ensure hands, clothing (especially belts) are clear of fan blades and other moving or hot parts of engine. For men remove ties and for women tie

long hair.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. PAY ATTENTION TO THE SAFE OPERATIONAL REQUIREMENTS AND WARNINGS &

CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY WHICH MAY INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS FOR FUTURE USE.

Recommended fuse rating

3 Amp

Отзывы: