USER MANUAL TRAVEL CHARGER
11
4 INSTALLATION
4.1 OPERATING LIMITATIONS
The charging station is designed exclusively for charging electric vehicles.
Charging only compatible electric vehicles.
Failure to comply with the requirements for operation, maintenance and repair,
described in this manual, excludes any liability of the manufacturer in the event
of malfunctions in the operation of the station.
The installation altitude of the charging station above sea level should not exceed 2000 m.
Follow the safety regulations to avoid injury and material damage when working with the
station.
Before the station installation, you should review this manual carefully and consult with a
licensed electrician, contractor, and trained installation expert to insure compliance with local
building codes, safety standards and wiring regulations.
4.2 STATION INSTALLATION
Make sure the installation site has relevant GSM or
4G (LTE) cellular coverage. Cellular repeaters may be
required to ensure good signal strength in
underground garages or other enclosed parking lots.
It is recommended to place the station under a
canopy to protect it from direct exposure to
atmospheric precipitation and sunlight.
For wall-mounted charging stations, a place must be
prepared for attaching the bracket. When choosing
the location of the station, keep in mind that there
must be a distance of at least 1 meter to the left and
right of the station body to any obstacle. The holes
for the anchor screws should be positioned as shown
in Figure 2.
Figure 2. Mounting bracket
