Autoenterprise I-STATION, Инструкция по эксплуатации

Страница: 7 / 16

INSTRUCTION MANUAL « I-STATION
»
7
Charging mode under IEC61851-1 Type 1 (SAE J1772), Type 2 (Mennekes)
Nominal input voltage
3-phase 380V
Input voltage deviation
limits, %, max
+-10
Nominal mains frequency 50 Hz
Main ports:
Type 1 (SAE-J1772)
Type 2 (Mennekes)
1 or 2 p.
Output power of 1 connector 19 kWh
Maximum current of the output cable 80 A
Maximum connector voltage 240 V
Cable length 6,5 m
1 or 2 p.
Output power of 1 connector 45 kWh
Maximum current of the output cable 3х63 A
Cable length 6,5 m
3. APPLICATION AREA, STATION SPECIFICATIONS
3.1 APPLICATION AREA
The charger is designed exclusively for charging electric vehicles.
For information about the materials, please contact Autoenterprise sales
representative or contact the Autoenterprise technical support team
The following sections should also be followed as part of the intended use:
• Only charge compatible electric vehicles.
• Failure to follow the instructions for use, maintenance and repair described in these
operating instructions excludes any liability on the part of the manufacturer in the event of a
defect.
• The system must only be operated, maintained and repaired by personnel familiar with the
intended use and hazards!
• Carry out maintenance and repairs in accordance with the specifications in these operating
instructions.
• The unit may only be operated with equipment and spare parts supplied or listed in the
spare parts and consumables lists.
• Using of the system in other areas is contrary to its intended purpose. The manufacturer is
not responsible for any damage to the equipment resulting from such use. The user is solely
responsible for any damage resulting from improper use of the system.
3.2 STATION SPECIFICATIONS