Autoenterprise COMMERCIAL 2, Инструкция по эксплуатации

Страница: 7 / 16

INSTRUCTION MANUAL COMMERCIAL 2 CHARGING STATION
7
3. APPLICATION AREA, STATION SPECIFICATIONS
Charging mode under IEC61851-1
Type 1, Type 2
Nominal input voltage
3 phases 380V
Input voltage deviation
limits, %, max
+-10
Nominal mains frequency 50 Hz
Main ports:
Type 1 (SAE-J1772)
Type 2 (Mennekes)
1 p.
Output power of the port 7,4 kWh
Current- 32А
1 p.
Output power of the port - 22 kWh
Current - 32 А
Type 1 + Type 2 Charging Stations Specifications
3.1 APPLICATION AREA
The charger is designed exclusively for charging electric vehicles.
For information about the materials, please contact AutoEnterprise sales
representative or contact the AutoEnterprise technical support team.
The following sections should also be followed as part of the intended use:
•
Only charge compatible electric vehicles.
•
Failure to follow the instructions for use, maintenance and repair described in these
operating instructions excludes any liability on the part of the manufacturer in the event of
a defect.
•
The system must only be operated, maintained and repaired by personnel familiar with
the intended use and hazards!
•
Carry out maintenance and repairs according to the specifications in this manual.
•
The unit may only be operated with equipment and spare parts supplied or listed in the
spare parts and consumables lists.
•
Using the charger in other areas is contrary to its intended purpose. The manufacturer is
not responsible for any damage to the equipment resulting from such use. The user is solely
responsible for any damage resulting from improper use of the system.