Autodesk HP xw9400, Руководство по установке оборудования

Страница: 9 / 54

Getting Started
Topics in this chapter:
■
Workflow for Hardware Setup and Application Installation on page 3
■
Hardware Configuration Guidelines on page 4
■
BIOS and Firmware on page 7
Workflow for Hardware Setup and Application Installation
The following procedure provides the general workflow for installing an Autodesk Visual Effects and Finishing
application on a workstation.
To install a Visual Effects and Finishing application on a workstation:
1 Review the guidelines for working with hardware components. See Hardware Configuration Guidelines
on page 4.
2 Connect all peripherals (mouse, keyboard, Wacom
®
tablet, graphics monitor) to the proper ports, and
connect your workstation to the Autodesk
®
Wire
®
network. See Peripherals Connection Diagrams on
page 13.
3 Connect your workstation to the storage. See Connecting Storage on page 35.
4 Connect a VTR and a broadcast monitor to your workstation. See Setting Up Video Hardware on page
17.
5 Set up the audio hardware. See Setting Up Audio Hardware on page 29.
6 Perform the procedures in the Red Hat Enterprise Linux Workstation 4, Update 3 Installation and Configuration
Guide to install your operating system and the Discreet
®
Kernel Utility (DKU).
7 (Optional) If you need to reconfigure your media storage filesystem, see the Autodesk Visual Effects and
Finishing Installation and Configuration Guide for information on setting up a standard filesystem (such
2
3