manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, Руководство пользователя

Поделиться
Скачать
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 Скачать руководство пользователя страница 1563

post

A vertical support for a 

railing

.

See 

Controlling Placement of Balusters and Posts

 on page 749.

primary view

The view on which one or more dependent views are based. The dependent views remain

synchronous with the primary view and other dependent views, so that when view-specific changes (such
as view scale and annotations) are made in one view, they are reflected in all views.

See 

Duplicate Dependent Views

 on page 192.

profile

A series of 2-dimensional lines and arcs that form a closed loop. Use profiles to define cross-sections

for railings, balusters, soffits, cornices, and other sweep-defined objects.

See 

The Families Guide

 on page 418.

Gutter profile

project

A Revit file that contains all information about a building design.

For more information, see 

What Is a Project?

 on page 117.

project base point

The project base point defines the origin (0,0,0) of the project coordinate system. It also

can be used to position a building on a site and for locating the design elements of a building during
construction.

See 

Project Base Points and Survey Points

 on page 1302.

Project Browser

Part of the Revit interface that shows a logical hierarchy for all views, schedules, sheets,

families, groups, and linked Revit models in the current project.

For more information, see 

Project Browser

 on page 93.

Project North

The top of the view in the drawing area. When producing solar studies or rendered images,

change the view orientation from Project North to True North to create accurate sunlight and shadow
patterns for the project.

See 

Rotating a View to True North

 on page 449.

project parameters

User-defined fields that you add to multiple categories of elements, sheets, or views in

a project. These parameters are specific to the project and cannot be shared with other projects.

For example, you can create a project parameter named Approved By for views. In the properties for each
view, you can enter a value for this parameter to indicate who approved the view.

Glossary | 1521

Содержание 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды