Autodesk 18507-051452-9325 - UPG ARCH DESKTOP 2007, Руководство по установке

Страница: 11 / 104

Installation Prerequisites
Before installing any of the products in the Design Academy package, it is
recommended that you make sure the following conditions have been met:
■ You understand the product licenses you’ve ordered. See Understand and
Verify Your Product Licensing (page 5).
■ For each product you plan to install, you have reviewed the system
requirements. See
Review the System Requirements (page 9).
■
You have an understanding of administrative permissions. See Understand
Administrative Permissions (page 9).
■ You have closed all other programs and disabled anti-virus software. See
Unsuccessful Installations (page 9).
■
You have created a distribution plan for products once they’re installed
on your primary system. See
Deployment Plan (page 10).
■ If you are using imaging software, you have properly cleaned your primary
system in preparation for creating a master image. See
Clean a Primary
System and Restore the Operating System (page 10).
■ You know how you’re going to personalize the products during activation.
See
Consistent Personalization Data (page 11).
■ You have created shared folders for each product you plan to install using
the Deployment wizard. See
Create Shared Folders for the Deployment
Wizard (page 11).
■ If you are using the Deployment wizard, you have checked for the presence
of an older version of the Deployment wizard. See
Check for Older Versions
of the Deployment Wizard (page 12).
Understand and Verify Your Product Licensing
The type of licensing you purchased for your package of Autodesk Design
Academy determines the installation and deployment options that you have
available. There are three types of product licenses: network, multi-seat
stand-alone and stand-alone.
Network License
■
Purchasing network licensed products is recommended for large
drafting/design facilities, classrooms, and lab environments. When you
Installation Prerequisites | 5